Arjo AtmosAir Velaris Скачать руководство пользователя страница 41

Страница: 41 / 52

TECHNICAL

SPECIFICATIONS

TOP COVER SPECIFICATION

Feature

Reliant cover

Premium cover

Removable Cover

Yes

Moisture Vapour Permeable
MVTR - Index method BS3424-34

10%

Polyurethane coating includes
an antimicrobial agent to control
microbial deterioration of fabric

Yes

Fire Retardant

BS 7175: 0, 1 & 5

Material stretch properties

4-way

Recommended wash
Temperatures

80°C (176°F) 15 minutes

Recommended Drying
Temperatures

40°C (104°F) or air dry

Maximum Drying Temperatures

Max 80°C (176°F)

Max 80 °C (176 °F)

Wipe-down Chemicals

• Chlorine at strength of

≤

1% (10,000 ppm) at pH 7-9

• Quaternary Ammonium Chloride at 1920ppm at pH 7-10

• Alcohol at 70% concentration.

• Phenolic solutions are NOT recommended/suitable.

Always rinse thoroughly with clean water after disinfection and dry
before storage. Alcohol does not require rinsing with water.

Further following disinfecting agents are also considered to be
acceptable by the TOP COVER material manufacturer

• Quaternary Ammonium solution 3-15% at pH range 7-10 see

Allowed disinfectants on page 31 for recommendations.

• Hydrogen Peroxide solution 3-10% at pH 5-9 see Allowed

disinfectants on page 31 for recommendations..

Always allow time for disinfection according to the instructions provided
by the disinfectant manufacturer.

Lifetime Expectancy

Standard

Increased by x2.5 times longer when
tested with accelerated aging (ISO
1419:1995)

Abrasion resistance

130 000 cycles

260 000 cycles (minimum)

For additional

ammability testing standards, refer to individual product law tags, if applicable.

Chlorine concentrations may vary from 250 ppm to 10,000 ppm depending on local policy and contamination status. If

an alternative disinfectant is selected from the wide variety available, Arjo recommend that suitability for use be con

rmed

with the chemical supplier prior to use

Содержание AtmosAir Velaris





















































Результаты поиска

Содержание AtmosAir Velaris

Отзывы:

Похожие инструкции для AtmosAir Velaris

Бренды по названию

Популярные бренды

Arjo AtmosAir Velaris, Инструкция по эксплуатации

Результаты поиска

Содержание AtmosAir Velaris

Отзывы:

Похожие инструкции для AtmosAir Velaris

Бренды по названию

Популярные бренды