Arjo AtmosAir Velaris Скачать руководство пользователя страница 33

Страница: 33 / 52

CLEANING AND DISINFECTION

Clean the mattress / seat cushion covers

14. Spray cleaning solution on a clean cloth and wipe all external areas and handles of the mattress /

seat cushion top and bottom covers. Make sure to wipe the mattress connector and the connector
cavity thoroughly. Wipe o

ﬀ

any dirt with a clean cloth.

15. Clean areas with residual dirt (e.g. handles) with the cleaning solution as needed.

16. Use a new cloth soaked in water to wipe o

ﬀ

all traces of cleaning solution

17. Use a dry cloth to remove any excess moisture.

Disinfect the mattress / seat cushion covers

18. Spray disinfectant solution on a clean cloth and wipe all external areas and handles of the mattress

/ seat cushion top and bottom covers. Make sure to wipe the mattress connector and the connector
cavity thoroughly.

19. Allow time for disinfection according to the instructions provided by the disinfectant manufacturer.

20. Use a new cloth soaked in water to wipe o

ﬀ

all traces of disinfectant solution from the mattress /

seat cushion.

21. Use a dry cloth to remove any excess moisture.

22. Allow the mattress / seat cushion top and bottom covers to air dry.

Wash the mattress / seat cushion top cover

23. Unzip and remove the top cover from the mattress / seat cushion.

24. Launder the top cover at a maximum temperature of 80°C (176°F) with detergent.

25. After washing, allow the top cover to air dry (preferred) or tumble dry at 40°C (104°F) or up to 80°C

(176°F) maximum.

26. Once dry re

t the top cover to the mattress / seat cushion.

NOTE

The top cover should be assessed for the level of soiling. If this soiling is deemed
excessive, the top cover should be washed. The bottom cover should always be cleaned
and disinfected by wiping.

Содержание AtmosAir Velaris





















































Результаты поиска

Содержание AtmosAir Velaris

Отзывы:

Похожие инструкции для AtmosAir Velaris

Бренды по названию

Популярные бренды

Arjo AtmosAir Velaris, Инструкция по эксплуатации

Результаты поиска

Содержание AtmosAir Velaris

Отзывы:

Похожие инструкции для AtmosAir Velaris

Бренды по названию

Популярные бренды