AZI Customer Service 800-528-7411 or 602-470-1414 Page
13
of
21
Press the ZERO switch to save PA none
as the PARITY setting.
SAVEd
is displayed followed by
PA none
.
Press the MODE switch to move to the
next parameter: AUTO SEND
The current auto send setting, AS oFF or
AS on is displayed.
Press the SEND switch until AS oFF is
displayed.
AS oFF
Press the ZERO switch to save AS oFF
as the AUTO SEND setting.
SAVEd
is displayed followed by
AS oFF
.
Press the MODE switch to move to the
next parameter: CONTINUOUS SEND.
The current continuous send setting, CS
oFF or CS on is displayed.
Press the SEND switch until CS oFF is
displayed.
CS oFF
Press the ZERO switch to save CS oFF
as the CONTINUOUS SEND setting.
SAVEd
is displayed followed by
CS oFF
.
Press the MODE switch to move to the
next parameter: DISPLAY BLANKING.
The current display blanking setting, bL on
or bL oFF is displayed.
Press the SEND switch until bL oFF is
displayed.
bL oFF
Press the ZERO switch to save bL oFF
as the DISPLAY BLANKING setting.
SAVEd
is displayed followed by
bL oFF
.
Press the ON/OFF switch
The display blanks.
Press the ON/OFF switch
The balance is ready for use.
Changing any of these settings from the AZI
factory presets is NOT recommended, and
will affect communication with the
Computrac Vapor Pro.
If any of the preset values are changed, use the above
instructions to restore the balance’s ability to
communicate with the Vapor Pro by resetting the values
to the preset AZI defaults listed.
Verify the balance’s ability to communicate with the
Vapor Pro as detailed in
Connecting the SP-150 to the
Vapor Pro
on page 7 above.
