Aritech 2X Series Скачать руководство пользователя страница 73

Страница: 73 / 140

Chapter 3: Configuration and commissioning

2X Series Installation Manual

3. Select Configuration, and then select Load auxiliary files.

4. Select Splash screens.

5. Select the bitmap file to load and confirm the selection.

6. Press F4 (Enter), and then press F1 (Back).

7. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).

Remember to apply saved settings from the Main menu.

8. Remove the USB flash drive as described in “Removing a USB device” on

page 44.

Loading language files or fonts

Select the Languages or Language fonts option to load language files or fonts
provided by the manufacturer.

To load language files or fonts:

1. Open the control panel door and insert the USB flash drive with the required

files into either of the USB type A connectors (see Figure 4 on page 17).
Close the control panel door.

2. Select Panel setup from the Main menu.

3. Select Configuration, and then select Load auxiliary files.

4. Select Languages or Language fonts.

5. Select the file to load and confirm the selection.

6. Press F4 (Enter), and then press F1 (Back).

7. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).

Remember to apply saved settings from the Main menu.

8. Remove the USB flash drive as described in “Removing a USB device” on

page 44.

Firmware updates

Caution:

Updating the control panel firmware may delete the current installation

configuration data. Always back up your configuration data before updating the
control panel firmware.

Select this option to load control panel firmware updates provided by the
manufacturer. The update application may only be available in English.

Содержание 2X Series













































































































































Результаты поиска

Содержание 2X Series

Отзывы:

Похожие инструкции для 2X Series

Бренды по названию

Популярные бренды

Aritech 2X Series, Руководство по установке

Результаты поиска

Содержание 2X Series

Отзывы:

Похожие инструкции для 2X Series

Бренды по названию

Популярные бренды