Chapter 3: Configuration and commissioning
100
2X Series Installation Manual
Table 59: Individual device diagnostics tests
Polling mode
Description
STA
Configures status polling mode
AV1 (default)
Configures analogue value 1 polling mode
AV2
Configures analogue value 2 polling mode
GRP
Configures group status polling mode
Individual device diagnostics values are shown in the table below.
Table 60: Individual device diagnostics values
Value
Description
Val1
Analogue value 1 (AV1, AV2) or status value (STA) [1]
Val2
Device type
Val3
Device address
Val4
Device status [2]
Val5
CRC of the reply [2]
[1] The analogue values displayed are the raw binary values received from the device.
[2] These values may not be available for all devices.
Password setup
Use the Password setup menu to change your password and to manage user
accounts (operator, maintenance, or installer).
Changing your password
Select this option to change your password.
To change your password:
1. Select Password setup from the Main menu, and then select Change
password.
2. Enter your current password.
3. Enter and then confirm your new password.
4. Press F4 (Enter), and then press F1 (Back).
5. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
Содержание 2X Series
