IPX-100 system installation & configuration
Page-54
TELECOMMUNICATIONS
c.
Technology
The technical column sets the hardware operation parameters of this key phone phone, as
below:
Active Service
Yes Enabled, users can answer or make calls using the phone
connected to this port.
No
Disabled this port.
Port No.
This port hardware port number (read only).
Phone Model
The key phone model connected to this port is detected (read only).
DSS Panel Group
The DSS button group of the phone is DSS Group 1~10, and the DSS
console phone is DSS60 Phone Group 1~5.
Be Pagging Tone
：
No Tone.
One Tone.
Paging melody Tone.
Ring Frequence
Set the ringing tone requenc 1~8.
Volume settings
The preset volume setting method of the phone
：
Disable Use the common volume preset set by the system.
Enable Use individual common volume presets.
SPK/RING Volume
Use the speaker to talk and preset the volume when ringing, Level 1~8.
Headset Volume
The default volume when using the headset to talk, Level 1~8.
d.
Other Oprions
The other options section is to set the working parameters of the key phone port in the PBX, as
below
：
Call Group
The pick up group of the extension, the options are Group1~Group30.
Pickup Group
The group that the extension can pick up can be a plural group, and the
number and number are separated by commas (for example, if you set the
first and second groups, enter "1, 2").
Toll Layer
Outbound dialing toll settings, options are as follows
：
Allow Layer 1 Outbound dialing toll level 1.
Allow Layer 2 Outbound dialing toll level 2.
Allow Layer 3 Outbound dialing toll level 3.
Allow Layer 4 Outbound dialing toll level 4.
Allow Internal Call Only internal extensions are allowed.
Operator Only Only allow to call the console group (RGP_default).
