Aristel IPX-100 Скачать руководство пользователя страница 35

Страница: 35 / 114

IPX-100 system installation & configuration

Page-35

TELECOMMUNICATIONS

3-1-1

IP Address to Bind UDP Listen Socket

This column is used to set the way the system monitors and sends and receives SIP packets.

：

IP Address to Bind UDP Listen Socket

Set the system to monitor the IP address of the UTP
format SIP packet, set to "0.0.0.0" to receive the
packet sent by any IP address.

Port to Bind UDP Listen Socket

Set the system to listen to the port of the UTP format
SIP packet.

Enable Server for Incoming TCP Connections Set whether the system listens to use SIP protocol to

transmit SIP packets.
No

Not listening (system default).

Yes

IP Address to Bind TCP Listen Socket

Set the system to listen to the IP address of the SIP
format SIP packet, set to "0.0.0.0" to receive the
packet sent by any IP address.

Port to Bind TCP Listen Socket

Set the system to listen to the port of the TCP format
SIP packet.

Enable Server for incoming TLS Connections Set whether the system listens for SIP packets

transmitted using the TLS protocol.
No

Not listening (system default).

Yes

IP Address to Bind TLS Listen Socket

Set the system to listen to the IP address of the TLS
format SIP packet, set to "0.0.0.0" to receive the
packet sent by any IP address.

Port to Bind TLS Listen Socket

Set the system to listen to the port f the TLS format
SIP packet.

Support ITU-T T.140 Realtime Text

Support ITU-T T.140 instant text transmission.
No

Not supported (system default).

Yes

Default Transports

The system presets the transport protocol used by
the SIP packet. UDP uses UDP protocol (system
default).
TCP Using TCP protocol.
TLS

Using the TLS protocol.

Содержание IPX-100



















































































































Результаты поиска

Содержание IPX-100

Отзывы:

Похожие инструкции для IPX-100

Бренды по названию

Популярные бренды

Aristel IPX-100, Руководство по установке

Результаты поиска

Содержание IPX-100

Отзывы:

Похожие инструкции для IPX-100

Бренды по названию

Популярные бренды