Aristel IPX-100 Скачать руководство пользователя страница 68

Страница: 68 / 114

IPX-100 system installation & configuration

Page-68

TELECOMMUNICATIONS

5-2-1-2

System Forwarding Settings

The user can set or cancel the forward settings of the extension in this page, or use the
phone to directly operate the function code to operate the settings or cancel the forward
settings. The field description is as follows

：

DND(Do Not Disturb)

Enable/Disable.

Forward ALL to Extension

Forward all incoming calls to this extension
directly to this extension.

Forward Busy to Extension

When the extension is busy, forward the call to
this extension.

Forward No Answer to Extension

Forward incoming calls to this extension when
the extension is no answered.

Forward Busy or No Answer to Extension Forward incoming calls to this extension when

the extension is busy or no answered.

Forward to Speed Dialing Location

Directly dial all calls to this extension forward to
this speed dial group.

Forward All to VM

Forward all incoming calls to this extension
directly to voicemail. There are two options: yes
or no.

Forward Busy to VM

When the extension is busy, the call is
forwarded to voicemail. There are two options:
yes or no.

Forward N/A to VM

When the extension does not answer, the call is
forwarded to voicemail. There are two options:
yes or no.

Forward Busy or N/A to VM

When the extension is busy or no one answers,
the call is forwarded to voicemail. There are two
options: yes or no.

5-2-2

Disable the Follow Me

To select in front of the extension in the list and click the “Disable” button to cancel the

forward function of the extension. The original settings will not be cleared. To re-enable the

forward function, the user only needs to enter the edit page again to select enable and submit.

Содержание IPX-100



















































































































Результаты поиска

Содержание IPX-100

Отзывы:

Похожие инструкции для IPX-100

Бренды по названию

Популярные бренды

Aristel IPX-100, Руководство по установке

Результаты поиска

Содержание IPX-100

Отзывы:

Похожие инструкции для IPX-100

Бренды по названию

Популярные бренды