background image

ARG - ABRAHAM REYNOLDS GROUP di Luciano De Pace & C. S.A.S. 

Viale Paradiso 19 - I - 10040 RIVAROSSA - (TO) Tel . : +39-011-9700112 - Fax. : +39-011-9700112  

E mail : [email protected] Web: www.argweb.eu    Web DYNAMO : www.dynamo-jet.it 

 

WARRANTY 

1 - ARG S.A.S. guarantees only the physical integrity of the Products at the time of delivery (hereinafter, the "Guarantee ARG Sas " 
) . The warranty covers defects or malfunctions identified out of the box and does not cover breakages, defects or damage from falls, 
misuse, improper installation, wear and tear over time. In case of operation of Warranty, Customer will be entitled only to repair or 
replace the product if required , at the discretion of ARG Sas that can be performed using the same product and / or with equivalent 
features to the problematic one, being excluded the right of the Customer to compensation for any further damage caused or related 
to the use and / or use of the faulty product . 
Any defects covered by warranty must be reported by the customer, subject to forfeiture , no later than 7 (seven) days from the date 
of delivery by email to [email protected] or a fax to 011-9528399 explaining the defect found .  
Once you have our permission to return to where it will be assigned a case number inside the RMA customer ONLY then will send 
the material to our office. The return of the product may only be charged to the customer , without prejudice to his responsibility for 
any possible damage incurred during the transport. The costs of returning  goods, are to be understood against ARG Sas for the entire 
duration of the warranty. 
To exercise the warranty is sure to keep the purchase invoice or sales receipt and  the Bill of Shipping , original packaging and / or 
packaging complete products , manuals and any original accessories present at the time of the product . 
In the event that after the inspection carried Technical / use product / prove the functioning will be charged € 50,00 VAT included in 
reimbursement  of  costs  incurred  to  verify  the  defect  +  shipping  , upon  receipt  of  payment  from  the  Customer  we  will  be  ship  the 
product to the customer . 
In  the  case  of  products  whose  defect  is  attributable  to  causes  not  covered  by  the  warranty  ,  ARG  Sas  will  send  the  customer  an 
estimate of repair and only after written acceptance by the customer , ARG Sas will give way to the repair . Items returned for repair 
will  be  shipped  only  after  the  payment  of  repair  and  transport  cost.  If  the  customer  does  not  accept  the  quote  and  does  not 
communicate the desire to regain the material at the end of the 30 days since communication will be disposed of. 

2  -  Notwithstanding  the  provisions  of  article  1  ,  ARG  S.A.S.  does  not  provide  any  guarantee  on  the  products  additional  to  that 
provided by individual producers . Technical support and warranty work on products are made , where applicable, by the individual 
producers , according to the terms and conditions listed in the documentation attached to the Products. 
In particular , ARG S.A.S. does not give any guarantee about the compatibility of products with other products or equipment used by 
the customer, nor give any guarantee regarding the suitability of products for the specific use intended by the customer. 

3 - Without prejudice to the case of willful misconduct or gross negligence of ARG Sas , It is now agreed that,  if found responsible 
for  ARG  Sas  in  any  capacity  against  the  customer  -  including  the  case  of  default,  in  whole  or  in part,  the obligations  assumed  by 
ARG Sas against the Customer as a result of the execution of an order responsibility for ARG Sas can not be higher than the price of 
the Products purchased by the Customer from ARG Sas  and for which the dispute arose . 

SAFETY - WARNING 

Please pay attention  this RC aircraft is not a toy ! 
If misused, it can cause serious bodily harm and damage to property. 
Fly only in open areas, preferably in official flying sites, following all instructions included with your radio and turbine. 
This plane is a compromise between a trainer jet and an aerobatics jet,  it is NOT a pylon racer  or speed jet for this reason we hardly 
recommend: 
Do NOT fly your airplane at to high speeds, because this may cause structural failures or fluttering surfaces 
The plane has been tested until 250 km/h, flying the plane over this speed is not recommendable. 
In this respect, since ARG S.A.S. as the manufacturer of the product called DYNAMO can not oversee how to use it.  
The same ARG Sas assumes no responsibility for any damage caused to persons and property by use of the Dynamo. The  use of the 
product called DYNAMO by the customer automatically implies acceptance of full and total responsibility  of the Customer for any 
damage to persons and property caused by or arising directly or indirectly. Tacitly confirm  that you have read and understood all the 
installation instructions contained in this installation Manual before using the same above. 
In the event that the customer does not intend to take  total responsibility is obliged to return the product to  ARG Sas within 7 days 
of receipt of the product purchased, uncut and complete package which will be advised on  receipt ARG Sas will after verification of 
integrity 'of the product to a full refund of the product purchased, net  of transport costs by bank transfer within 7 days. of receipt. 

Many thanks to purchase our products, ARG Team  wishes You  good fly ! 

Содержание Dynamo



















Отзывы: