manualshive.com logo in svg

Areva MiCOM P125, Техническое руководство, Страница: 120 / 362

Поделиться
Скачать
Areva MiCOM P125 Скачать руководство пользователя страница 120

P12y/EN FT/D32 

User Guide

 

Page 40/86 

 

MiCOM P125/P126 & P127

 

4.6.2.4 

Threshold Menu Ie> Redtifier curve 

Delay Type 
 RECT 

Displays threshold delay time type. Setting choices are: 
DMT (definite time) RI for the electromechanical inverse 
time curve, IEC-XX, CO2, CO8, IEEE-XX, RECT inverse 
time delay curve. 
If the user selects RECT curve the following menu is 
displayed: 

TMS 
 1.000 

Displays TMS value for the curve. 
The setting range is from 0.025 to 1.5, in steps of 0.025. 

tReset 
 0.10 

s 

Displays setting value for the reset time. 
The setting range is from 0 to 100 s, in steps of 10 ms. 

Ie> >> >>> 
Interlock  

Yes 

Interlock of first threshold by the second and third 
thresholds, but only if first threshold trip is set to IDMT. 
Setting choice: No, Yes 

By pushing 

"

 the next window will display the Ie>>? 

4.6.2.5 

Threshold Menu Ie> ANSI/IEEE  

Delay Type 
 IEEE-EI 

Displays threshold delay time type. Setting choices are: 
DMT (definite time) RI for the electromechanical inverse 
time curve, IEC-XX, CO2, CO8, IEEE-XX inverse time delay 
curve. 
If the user selects IEEE/ANSI curve, the following menu is 
displayed: 

TMS 
 1.000 

Displays TMS value for the curve.  
The setting range is from 0.025 to 1.5, in steps of 0.025. 

4.6.2.6 

Reset Threshold Menu Ie> DMT/IDMT IEEE/ANSI  

Reset Delay Type 
 DMT 

Displays the reset delay time type.  
Select between DMT (Definitive Time) and IDMT (Inverse 
Time). 
If the user selects DMT delay type, the following menu is 
displayed: 

tReset  
 0.10 

s 

Displays setting value for the reset time. 
The setting range is from 0 to 100 s, in steps of 10ms. 

By pushing 

"

 the next window will display the Ie>>? 

Reset Delay Type 
 IDMT 

Displays the reset delay time type.  
Select between DMT (Definitive Time) and IDMT (Inverse 
Time). 
If the user selects IDMT delay type, the following menu is 
displayed: 

RTMS 
 0.025 

Displays the RTMS value associated with the IDMT reset 
time choice.  
The setting range is from 0.025 to 3.200, in steps of 0.025. 

Ie> >> >>> 
Interlock  

Yes 

Interlock of first threshold by the second and third 
thresholds, but only if first threshold trip is set to IDMT. 
Setting choice: No, Yes 

By pushing 

"

 the next window will display the Ie>>? 

Содержание MiCOM P125











































































































































































































































































































































































Отзывы:

Нет отзывов