User Manual
Page | 23 [email protected]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [email protected]
AV
NVR
This option sets the AV NVR as a DHCP client.
a. The AV NVR will get the IP address from the external DHCP server. If no DHCP server is on
the network, the AV NVR will default to the default IP address, 192.168.101.50, and the
built-in DHCP server will remain off.
b.
Users will not be able to change IP settings when this mode is selected.
c.
Users cannot turn on/off built-in DHCP server.
3. Manual Configure
This option sets the AV NVR to use a static IP address.
a. Users can edit the IP settings, subnet mask, default gateway address and DNS server
address for the AV NVR.
b. Users can turn on or off the built-in DHCP server via the
“DHCP Sever” section:
4. User can also configure the network settings of the PoE switch by checking
PoE Switch
Configuration
:
NOTE
: The network of PoE switch is isolated from the outside network, so if you would like to
access camera web interface, you need to connect your laptop/PC directly to the PoE ports.