User Manual
Page | 10 [email protected]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [email protected]
AV
NVR
Preparation
NOTE
: This product is for indoor use only.
NOTE
: This product shall be installed in a well-ventilated and dust-free environment.
NOTE
: Keep this product away from direct sunlight and heat resources
1. (Optional) If you would like to install HDDs or expand your HDD capacity, please refer to the
“HDD installation”
section of this manual.
NOTE
: AV800-4T0 and AV1600-8T0 do not have a spare interface for additional HDDs.
2. Connect supplied AC power cord to the power input (#15) on the NVR
3. Connect a Cat 5e cable to the LAN 1 port (#8) on the NVR
4. (Optional) Connect a monitor to the HDMI (#12) or VGA (#11) interface on the NVR.
NOTE
: You can refer to
“Connect to the NVR” section for more details.
5. Connect supplied mouse to the USB port (#6 or #13) on the NVR
6. (Optional) Connect a keyboard to the USB port (#6 or #13) on the NVR
7. (Optional) Connect your Audio in/ out devise to the Audio In (#9) / Out (#10) interface on the
NVR.