Arecont Vision AV NVR Series Скачать руководство пользователя

Страница: 17 / 55

User Manual

Page | 17 [email protected]

+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [email protected]

NVR

Synchronized Playback

isit “Synchronized Playback” page

(Please refer to “Synchronized Playback” chapter for more
details)

View Sequence

Configure the cycle interval (10s/ 20s/ 30s/ 45s/ 60s).
Click “Start/ Stop” to start/ stop switching views:

On “Camera Tree” screen: switch between cameras
based on current screen layout selected.

On “Saved Views” screen: switch between Saved
Views.

Screen Layout

AV800-XXX

AV1600-XXX

Select the icon for your screen layout.
By clicking the same icon different times, you can switch to
the next camera group. For example, click the

“4 splits” icon

once, the displayed channels are Ch1 to Ch4, then click the
“4 splits” icon again, and the displayed channels are
switched to Ch5 to Ch8.

Full Screen

Switch to full screen

Camera Event Notification

The icon will flash when cameras receive Motion
Detection\Digital Input\ Camera Disconnect notifications.
The notification will have channel/ date/ time/ event type
information.

Click

to play the Event Recorded video

Click

to delete the event notification.

NVR Event Notification

Receive notifications if a warning sound is triggered or the
HDD of the NVR failed to record data.

Channel Status

Check the channel status:
Camera Name/ IP Address/ HTTP Port/ Recoding Types/
Stream Status (Codec/ Resolution/ Frame rate/ Bit rate)

#2 Camera Tree

Channel Number

Display the Channel Number and select the camera order
by Number or Name

Save View

Name the current view and save it.
This function will help to quickly display your desired views
when needed.

Drag and Drop

Enable the drag and drop function. It allows user to drag a
channel from the camera tree and drop to the desired view
location.

OSD

View OSD (on screen display).

(Please refer to “OSD” section for more details)

Aspect Ratio

Expand the width and height of the image to fit the video
layout or keep the original aspect ratio for all channels.

Edit Channel Name

Edit the channel name.

Содержание AV NVR Series
























































Результаты поиска

Содержание AV NVR Series

Отзывы:

Похожие инструкции для AV NVR Series

Бренды по названию

Популярные бренды

Arecont Vision AV NVR Series, Руководство пользователя

Результаты поиска

Содержание AV NVR Series

Отзывы:

Похожие инструкции для AV NVR Series

Бренды по названию

Популярные бренды