User Manual
Page | 15 [email protected]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [email protected]
AV
NVR
iv. Double-click the IP address or type the IP address to the web browser to access the web user
interface, and
enter default username “admin” and password “admin” to login to the AV NVR.
NOTE
:
It’s highly recommended that you change the password during initial setup.
NOTE
: You can have 4 to 31 characters including upper and lower case letters, digits for both User
Name and Password, and only allow four symbols: “.”, “@”, “_”, “-”.
Connect IP Cameras
1. Plug cameras into PoE ports (#7)
NOTE
: This product supports Smart Plug-and-Play, so cameras will be set up and configured
automatically in few minutes.
2. SurroundVideo and MicroDome Duo cameras will take four and two channels, so please make sure
plug the next camera into the following PoE ports. For example, if one SurroundVideo camera plugs
into Port#1, the next camera must plug into Port#5 since the SurroundVideo camera has taken
Channel#1, #2, #3, and #4.
3. ( If necessary) Visit
Settings> Channel
and a
dd cameras by “Auto Search” or “Manually”. For more
details, please refer to “
Channel
” section for instructions.