Arbiter Systems Portable Power Sentinel 933A, Руководство по эксплуатации

Страница: 59 / 191

“How many 10-second intervals do you want?” For 15 minutes, this
means 100 intervals (realize that the first record occurs at 9:30:00
a.m.). When finished, press the EXIT DURATION soft key.
5. Press the AUTO LOG ENABLE soft key to arm the Autolog feature
so that the 933A begins measuring when its clock reaches the Start
Time.
NOTE: the AUTO LOG ENABLE will be vacant without a
future start time and date to the internal clock.
3.5.1 Logging Data Indication
When the Autolog start time is reached, the 933A will begin logging data
based on the connected input signals and Auto-log Rate. Auto-log Entries
(shown as “0” in Figure 3.6) begin incrementing with each new record
stored. “AL”, appearing within the Status Indicators, indicates logging
activity. Autolog indication is described in Figure 2.9.
Figure 3.7: Review
Log Data
To Access Recorded Data
1. Press REVIEW key > SHOW LOG (soft key).
2. Press REVIEW SELECTIONS (soft key) > SHOW AUTO LOG
(soft key). This sorts Autolog data from other logged data.
3. Press the number keypad corresponding to the index number at the
left of the record. This will open the DISPLAY SELECTIONS menu,
as if you pressed DISPLAY key. Now, press the number of the data
type you wish to view.
4. Press any other number key to change data types (i.e. that
corresponds with the Display key).
When viewing recorded data, the instrument is effectively in HOLD
mode and is symbolized by a small magnifier icon among the Status
Indicators. This is shown at the right of the battery symbol in Figure 2.9.
41