Arbiter Systems Portable Power Sentinel 933A, Руководство по эксплуатации

Страница: 45 / 191

Use the DISPLAY key to cancel the transfer.
To capture a bitmapped file, use a terminal program, like Hyper Ter-
minal or Tera Term Pro; See Section 2.6 “Bitmapped File Downloading”
later in this chapter.
2.4.11 Hold Key
Press the Hold key to alternate between the Measurement Mode and Hold
Mode. The Hold Mode freezes the display and displays the current data
at the time that you press the Hold key. During the Measurement Mode,
the indicator in the meter symbol is moving. The 933A is normally placed
in Hold Mode when reviewing data recorded in flash memory.
2.4.12 933A Status Indicators
A set of status indicators, located in the lower left corner of the 933A
display, describe the instrument operating modes, including time and date.
These symbols appear when viewing any data, except waveform, in the
Measurement or Hold Mode. Figure 2.9 below provides definitions for
each of these indicators.
Figure 2.9: Status Indicator Definitions
Battery Level
On a full charge, the battery symbol should be completely dark and the
battery giving the 933A about 8 hours of operation. When the battery is
drained, the symbol appears as an outline of the battery symbol and may
have the letter L to indicate that the charge is Low, or the letter C to
indicate that it is charging.
27