Arbiter Systems Portable Power Sentinel 933A, Руководство по эксплуатации

Страница: 42 / 191

2.4.3 Setup
−
Configuring the 933A
Press the Setup key to configure all of the features controlling the operation
of the 933A. For example, before actually connecting the 933A to a circuit,
it should be configured to match the measured electrical system. Whether
it is single phase or three phase, with one, two, or three elements, the 933A
is adaptable to most of the commonly-wired systems. Configure triggers
from the setup menu so that the 933A is ready to record events when they
occur. Also, you can set up the Autolog feature to automatically record
the connected signals on a specific day and over a set time interval. For
accurate low currents measurements, configure the 933A with one of the
low-current modules (see Sections 1.4.12 and 3.8).
Figure 2.5: Setup
Key Menus
Chapter 3 covers all of the setup and configuration features that control
how the 933A operates. This includes the type of measured electrical
system, setting up the internal clock, setting up the serial (RS-232)
port, configuring the automatic data logging features, setting up current
transformers and potential transformers, setting up current modules and
triggering.
2.4.4 Five Soft Keys
Press any of these keys when the correct label appears in the lower line
of the display that indicates your choice. These keys may change function
whenever a specific function key, or other soft key, is pressed.
Figure 2.6: Five Soft Keys
24