Arbiter Systems Portable Power Sentinel 933A, Руководство по эксплуатации

Страница: 83 / 191

show up in the list. The “T” symbol on the right side of the individual
record indicates that the data record is from a trigger.
Figure 5.2: Notice that
11 records show up in the
list. “A” indicates
Autologs, “K” indicates
Key Logs and “T”
indicates Trigger Logs.
Compare the time and
date of record number 0
with the time and date of
Figure 5.4.
For view Trigger data, press the REVIEW key > SHOW LOG > REVIEW
SELECTIONS > SHOW EVENT LOGS. Next to view data, press the
record number (left side). You should see the DISPLAY SELECTION
screen as in Figure 5.3 below.
Figure 5.3: Review
Display Selection;
appears the same as
pressing the DISPLAY
key, but during review it
is in Hold Mode.
Press any of the number keys on the keypad to select the desired data
type. Remember that the 933A stores a complete 1-second record of all
measured data. The date and time of the data record in the list should
agree with the date and time of the actual data record shown here – see
Figure 5.4.
65