Arbiter Systems Portable Power Sentinel 933A, Руководство по эксплуатации

Страница: 125 / 191

7.3.1 Setting Up a New Trigger
1. From any screen, press the SETUP key, then select 7- Trigger Setup
from the number keypad. You should see a screen similar to that in
Figure 7.6, depending on whether the trigger is already configured,
or OFF. Using the left/right cursor keys, choose a Trigger number.
Figure 7.6: Power Quality
Trigger Selection
2. Using the up/down cursor keys move the cursor to SELECT MODE,
then use the left/right cursor keys to choose PWR QUAL and press
the Enter key. You should see a screen entitled EDIT PQ TRIGGER
(by number) as in Figure 7.7.
Figure 7.7: Selecting PQ
Parameters
3. This is the screen in which you configure most of your power quality
settings. After you are finished with all of the settings in this screen,
press the LOGGING TIME soft key to set the how long you want the
933A to log one-second data. See power quality parameter definitions
in Section 7.3.2.
107