24-04-13
Page 9 of 12
3786417
30. Fit M12 x 40mm bolt (passenger’s side)
& M12 x 35mm bolt (driver’s side), ½”
flat washers, heavy duty flat washers,
spring washers and 12mm nuts to lower
bull bar mounting holes and vehicle tie
down plates. (Do not Tighten)
NOTE: Insert bolt from outside of lower
mount holes so heavy-duty washer covers
large hole on tie down plate.
31. Adjust the bull bar to achieve a uniform
gap to the grill and mudguards. If
additional height adjustment is required,
the M12 bolts fitted at step 5 may be
loosened for additional adjustment.
32. Tighten all the fitted bolts, including
those fitted at step 5, to a torque of
77Nm or 80 ft-lb.
33. Once the bar is secured, using the
10mm holes in chassis bracket as
template, drill 10mm hole through side of
chassis and secure using M10 x 40mm
bolt, flat washers, spring washer and nut.
34. Wind each impact absorber adjuster bolt
out until it is firm against the chassis rail
extensions and tighten the lock nut.
