24-04-13
Page 11 of 12
3786417
37. Fit three M6 cage nuts to the upper
deflector panel as shown on the left.
38. For non-4.8 litre petrol engine vehicles,
assemble the second deflector panel
using M6x16mm bolts, washers and
flange nuts as shown on the left.
39. 4.8 litre petrol engine vehicles only
require the upper panel to be fitted to the
vehicle.
40. Fit the air deflector / deflectors using M6
nuts and bolts.
41. Fit three M6x16 bolts and washers
through the front of the upper deflector
into the cage nuts previously installed.
42. Fit two M6x16 bolts through the two slots
on each side of the deflector. Use M6
washers and flange nuts to fasten the
deflector to the mating impact absorbers.
These slots are accessible through the
cut-outs in the deflector.
