24-04-13
Page 7 of 12
3786417
19. Place winch on a stand with mounting
holes facing upwards and lower bull bar
onto winch. Align all four holes and
secure using 1 ½” x 3/8” bolts on top
holes and 1 ¾” x 3/8” bolts on lower
holes, plus 3/8” spring and flat washers.
20. When all bolts are fitted and finger tight,
centralize bolts in holes and tighten top
holes only, using a stepped ring spanner.
21. Remove lower bolts.
22. Fit roller fairlead into cutout and refit bolts
and tighten firmly.
23. Connect the winch control box cables to
the winch. Refer to Warn installation
instruction manual when wiring up winch.
Ensure that all cables are installed well
clear of all sharp or moving parts, by
using cables ties from bolt kit.
BULL BAR FITMENT
FUNCTION
INDICATOR
HARNESS
VEHICLE COMBINATION LAMP
RIGHT
LEFT
TURN LAMP
GREEN
GREEN / RED
GREEN / YELLOW
EARTH
BLACK
BLACK
BLACK
PARK LAMP
RED
BLUE/BLACK
BLUE/BLACK
24. Remove the splash guards attached to
the bumper and remove the bumper and
grille from vehicle.
25. Remove the vehicle’s head lamps and
wire the indicator looms provided in the
kit to the vehicle’s indicator loom using
scotch locks.
Leave these new looms
hanging freely for easy access when the
bar is fitted.
26. Re-attach the vehicle’s head lamps and
grille.
