Aras CTINT1000, Руководство пользователя

Страница: 39 / 42

One-Channel Video Transmitter
33
Appendix
LED Indicators
LED Status Description
Power LED
Unlit No power connected to the unit.
Flicker The unit is booting.
Lit The unit is operating.
Network LED Lit The unit is connected to a network.
Power LED &
Network LED
Flicker
sequentially
The unit is upgrading the software.
Flicker
simultaneously
The unit is recovering NAND flash memory.
Troubleshooting
Problem Possible Solution
No Power
y
Check power cord connections.
y
Confirm that there is power at the outlet.
No Live Video
y
Check camera video cable and connections.
y
Confirm that the camera has power.
y
Check camera lens settings.
y
Check network connections on your PC and a transmitter.
Live Video Very Bright Check if a video termination resistance switch is set to ON (downward).
Connection to the INIT
program is not available
because of wrong ID and
password. If you lost the administrator ID and password, do a factory reset. The
factory reset returns all the settings including network settings to the original
factory settings. You must customize all settings including network settings
after a factory reset.
The WebGuard program
is not available.
If you cannot launch the login page of the WebGuard program, check
Microsoft Internet Explorer’s version. WebGuard might not run properly
in versions earlier than 6.0.
Connector Pin Outs
I/O Connector
AI Alarm Inputs
GND GND (Chassis Ground)
NO Alarm Out (Normally Open)
C Common