Aras CTINT1000, Руководство пользователя

Страница: 26 / 42

User’s Manual
20
4.2 System
You can change a transmitter’s system information, import or export all settings,
and add users or groups. When you click the
System
menu on the Remote
Setup screen, the current System settings are displayed on the right side of
the screen.
General
y
Language
: Choose the language to be used during
remote setup.
y
Name : Enter the transmitter’s name (up to 31 characters
including spaces).
y
Note : Enter additional information about the transmitter.
y
HW Version , SW Version : These fields display the
transmitter’s hardware and software versions.
y
Setup
í
Load Default Setup… : Click to return all except network
related settings to the original factory settings.
í
Import Setup…
: Click to apply the settings saved as a .dat file format to the transmitter. A setup screen
appears allowing you to select the setup file. You can select whether or not network settings (IP address,
port number, DVRNS) will be included when the setup is applied.
í
Export Setup… : Click to save the current transmitter settings as a .dat file format. A setup screen
appears allowing you to name the setup file.
Date/Time
y
Date / Time : Change the system date/time, date/time
format and time zone and turn daylight saving time on
or off by checking the box. Clicking the
Apply button
applies the changes immediately.
y
Time Sync
í
Automatic Sync : Check the box to automatically
synchronize the time with a time server. Enter the IP
address or the domain name of the time server and set
the time interval for synchronization.
í
Run as Server
: Check the box to run the transmitter
as a time server.
NOTE: You can use the domain name instead of the IP address of the time server during the Time Sync
setting if you set up the DNS Server when setting up network.