Aras CTINT1000, Руководство пользователя

Страница: 29 / 42

One-Channel Video Transmitter
23
NOTES:
y
You will need to get the IP address or domain name of the DVRNS server from your network
administrator. You can use the domain name instead of IP address if you set up the DNS server during
the IP Address setup.
y
When using a NAT (Network Address Translation) device, refer to the NAT manufacturer’s instructions
for the proper network settings.
y
The transmitter’s name you entered in the DVR Name field should be checked by clicking the Check
button, otherwise the DVRNS changes will not be saved. When entering no name or a name already
registered on the DVRNS server, an error message displays.
Port
Set up Admin, Watch, Record, Audio and WebGuard port
numbers for connections to the transmitter from remote
software or the WebGuard program.
Check the Use HTTPS box to enhance the security of
WebGuard pages by using the HTTPS protocol when
running the WebGuard program.
NOTES:
y
The transmitter restarts automatically after changing the
port settings.
y
Do NOT use the same port number for more than one
function, or else, the transmitter cannot be connected
with RASplus or WebGuard.
CAUTION: When changing the port settings, you must change the port settings on RASplus too.
Filtering & Bandwidth
y
IP Filtering : Check the box to use the IP filtering
function. You can allow or block connections to the
transmitter by designating IP addresses.
í
Allow List
: Check the box to add or remove IP
addresses allowed to connect to the transmitter. When
clicking the
Add
button, a screen appears allowing
you to enter IP addresses. Selecting an IP address
in the list and clicking the
Remove
button deletes
the selected IP address. Clicking the Remove All
button deletes all IP addresses.
í
Deny List : Check the box to add or remove IP addresses to block connection to the transmitter.
When clicking the Add button, a screen appears allowing you to enter IP addresses. Selecting
an IP address in the list and clicking the
Remove
button deletes the selected IP address. Clicking
the
Remove All
button deletes all IP addresses.
While adding IP addresses to Allow List or Deny List , selecting the Host option allows you to add
one IP address at a time. Selecting the Group option allows you to add continuous IP address
numbers in one action by designating a range of IP addresses to add.