35
Call
SH-06E_E_04.fm
[35/37]
1
In the home screen, [
R
]
/
[Phone]
/
[
z
]
/
[Call settings]
/
[Network service]
2
Select an item
Koe-no-Takuhaibin
: Record or play voice messages with
simple operations.
Voice mail service
: A service to answer calls with a reply
message and record callers’ messages for you.
Call forwarding service
: A service to forward calls.
Call waiting
: A service to place the current call on hold and
answer a new incoming call when receiving a call during
another call.
Caller ID notification
: Display your phone number on the
other party’s phone when you make a call.
Nuisance call blocking service
: Register and reject phone
numbers of “nuisance calls” such as prank calls.
Caller ID display request service
: Answer calls without
notifications of phone number and play the guidance for
asking notifications of the numbers.
Second call settings
: Deal with an incoming call during
another call by a method determined in advance.
Call notification
: Notify you of incoming call information with
SMS.
English guidance
: Play the guidance for setting each network
service and the voice guidance stating that the handset is
outside the service area etc. in English.
Remote operation settings
: Operate Voice Mail Service, Call
Forwarding Service, etc. from a touch-tone land-line phone,
public phone, mobile phone provided by DOCOMO, etc.
Public mode (power OFF) settings
: Play a message stating
that you are in a place that does not allow the use of mobile
phone and automatically disconnect the call when receiving
a call with the handset turned off.
1
In the home screen, [
R
]
/
[Phone]
/
[
z
]
/
[Call settings]
/
[Advanced call settings]
2
Select an item
Sub address settings
: Set whether to use “
＊
” included in a
phone number as a separator for the sub address.
Prefix settings
: Make settings for the prefix number.
Call blocking
: Make settings for the call rejection.
･
To edit a specified number: [Specified numbers]
/
[
z
]
/
[Edit]
/
edit the phone number
1
In the home screen, [
R
]
/
[Phone]
/
[
z
]
/
[Call settings]
/
[Sound & Vibration settings]
2
Select an item
Phone ringtone
: Set the ringtone.
Vibrate on ring
: Set whether to activate the vibrator when
receiving a call.
Dialpad touch tones
: Set whether or not to enable dialing
sounds.
You can set the screen displayed when you operate as follows.
In the home screen, [
R
]
/
[Phone].
1
In the home screen, [
R
]
/
[Phone]
2
[Recent calls]/[Favorites]/[Dial]
3
[
z
]
/
[Set start-up screen]
1
In the home screen, [
R
]
/
[docomo
phonebook]
/
[Contacts]
/
[Register]
:
When the confirmation screen for using cloud computing is
displayed, check the content and select [Later]/[Start].
:
If there are multiple accounts, the screen for selecting an
account to register is displayed.
[Any key answer settings]
Following items can be set.
Answer: Press
x
on receiving a call to answer it.
Quick silent: Press
x
on receiving a call to temporarily stop
the ringtone, vibrator or flash of the incoming lamp.
[Hello Answer]
Once you stop the ringtone or vibrator by using Quick silent,
you can answer the call with voices.
When answering an incoming call during another call or
answering an incoming with an earphone/microphone or a
Bluetooth device, you cannot answer the call with voices.
Speak at your natural speed. In the following cases, your voices
may not be recognized properly.
When the surrounding noise is big
When noises such as from clearing your throat are made
before or after the phonation
When the phonation is not clear such as when the phonation
is interrupted
When the phonation is not natural such as when you pause
between every two syllables
Try the followings when your voices are not recognized
properly.
Make sure not to speak too fast
Make sure to speak at the microphone and not to speak in
too small a voice
Make sure to speak 5 to 10 cm away from the microphone
The recognition rate may be improved by setting a word which
consists of at least five syllables as a command.
Network service
Advanced call settings
[Call blocking]
Even if you set Not registered in address book, calls from
contacts for whom the secrecy setting is set are received. The
name registered in the phonebook does not appear and only
the phone number appears.
Sound & vibration settings
Setting start-up screen
The start-up screen may not follow the setting depending on the
home app in use.
Phonebook
Adding contacts to phonebook
SH-06E_E.book 35 ページ ２０１３年６月３日 月曜日 午後３時５１分