18
Before Using the Handset
SH-06E_E_02.fm
[18/27]
Move your finger like sweeping the touch panel in the home screen
etc. to switch pages.
You may be able to zoom an image in/out etc. by putting two fingers
on the touch panel and moving them with putting a distance
between two fingers apart (pinch out)/closer (pinch in) depending
on the function and screen in use.
When you put your finger over the touch panel, you can use
the functions to operate the handset without touching the
touch panel, such as Air Zoom, Air Pattern and Air Animation.
Enable [Air Operation] of Touch Panel in advance (
n
P. 63).
Operate with your finger approximately 5 mm off the touch panel.
When you put your finger over the touch panel while viewing a
screen in the “Browser” app, you can enlarge the selected section.
Enable [Air Zoom] of Touch Panel in advance (
n
P. 63).
If you set Screen lock to [Pattern], you can enter the pattern by
putting your finger over the touch panel.
Set Screen lock to [Pattern] and enable [Air Pattern] of Lock &
Security in advance (
n
P. 67).
If you set Batch change lock screen/ home application to [Feel UX],
you can switch wallpapers or confirm part of the screen displayed
after unlocking the touch panel by putting your finger over the touch
panel unlock screen.
Set Batch change lock screen/ home application to [Feel UX] and
enable [Air Animation] of Welcome Sheet(lock screen) in
advance (
n
P. 27, P. 63).
When you touch [
z
] or touch and hold the screen, functions
(menus) available in that screen appear.
Example: Home screen
When a check box is displayed beside the setting item, you can set
it enabled/disabled or [ON]/[OFF] by touching it.
Example: Location services screen, Alarm screen
[
0
]: Enabled, [
1
]: Disabled
The screen display is switched when you tilt the handset.
Vertical/Horizontal display is not switched if the handset is turned
in the place parallel to the ground.
The screen display may not be switched properly when a sound
or a vibration is being activated.
Vertical/Horizontal display may not be switched properly right
after the screen or power is turned on.
You can set the display not to automatically switch (
n
P. 63).
Screens may be displayed in the full screen depending on the
app when switching the vertical display to the horizontal display.
Hold
H
+
y
down for at least 1 second to save the screen being
displayed to the handset memory.
The shutter sounds when shooting a screenshot.
You can check the saved screenshots by using Album etc.
Flick
Pinch out/Pinch in
Air Operation
Air Zoom
Operations may not be available depending on the displayed
screen.
Air Pattern
Air Animation
Operation while using function
Retrieving menu
Switching the settings
Vertical/Horizontal display
Shooting screenshot
Data cannot be saved while displaying Mobacas, 1Seg, home
network, e-books, etc.
Data may not be saved completely or partially depending on the
app.
Set item list
SH-06E_E.book 18 ページ ２０１３年６月３日 月曜日 午後３時５１分