14
Before Using the Handset
SH-06E_E_02.fm
[14/27]
The handset supports only docomo mini UIM card. Change the
UIM at a docomo Shop.
Before inserting or removing the docomo mini UIM card, turn off
the power. Hold the handset securely with your both hands.
1
Open the docomo mini UIM card/microSD Card
slot cover
:
Hook the tip of a finger into the slot to open.
2
Hold the docomo mini UIM card with the IC
(gold) side turned down and insert it slowly into
the docomo mini UIM card slot (
1
)
3
Gently push the docomo mini UIM card towards
inside by using the circled area
A
of mini UIM
In-out tool (sample) (
2
)
:
Push it slowly towards inside until a click is heard.
:
Do not insert the docomo mini UIM card at an angle or with
the wrong side down. The docomo mini UIM card slot may be
damaged.
4
Close the docomo mini UIM card/microSD Card
slot cover
:
Push and close securely in the direction of the arrow so that
gaps are not left between the handset and the docomo mini
UIM card/microSD Card slot cover.
1
Open the docomo mini UIM card/microSD Card
slot cover
2
Gently push the docomo mini UIM card towards
inside by using the circled area
A
of mini UIM
In-out tool (
1
)
:
Push it towards inside until a click is heard. It will come out
towards you.
3
Remove the docomo mini UIM card (
2
)
:
Remove the docomo mini UIM card by slowly pulling it
straight out. Do not let it fall.
4
Close the docomo mini UIM card/microSD Card
slot cover
The internal battery is not fully charged at the time of
purchase. Be sure to charge the battery before use.
For details on the estimated charge time
n
P. 90
The battery can also be charged with the handset turned on
(While charging, the battery icon appears with [
w
]
superimposed).
Do not charge for a long time with the power left turned on. If the
handset is left turned on after charging is complete, the internal
battery charge level decreases.
In this case, an AC or DC adapter (sold separately), or a wireless
charger (sold separately) charges the battery again. However,
depending on the time when the handset is disconnected from
the AC or DC adapter, or wireless charger, the battery charge
level may be low or the battery may only be usable for a short
time.
If the handset is left for a long time even after the charging is
completed, the battery level may decrease.
When the battery is empty and the handset is being charged, the
charging lamp may not illuminate immediately. However,
charging is in progress.
If the battery empty alert is displayed and the power cannot be
turned on, charge the battery for a while.
Inserting docomo mini UIM card
Slot
docomo mini
UIM card slot
Notch
IC (gold)
Notch
Removing docomo mini UIM card
Make sure not to touch or damage the IC (gold) area of the
docomo mini UIM card when handling it. Also, note that
inserting or removing the docomo mini UIM card forcibly may
damage it.
Refer to the docomo mini UIM card user’s guide for more
information on the docomo mini UIM card.
Do not misplace the docomo mini UIM card once it is taken out.
Charging
Cautions while charging
SH-06E_E.book 14 ページ ２０１３年６月３日 月曜日 午後３時５１分