aquilar AquiTron AT-G-ALERT-C, Инструкция по установке и эксплуатации

Страница: 33 / 36

1100-2184 Rev 0 33
4.5 Event History
The AT-G-ALERT-C will save new Alarm or Fault events to the Event History . This can
be accessed from the Setting screen. The event history is a rolling list of 100 entries. In
addition, entries tagged as neither alarm nor fault are created when a device status clears
to normal.
Note : The Fault Code is stored as a decimal value and should be converted back to a
hex or binary value for easier interpretation of the specific fault codes.
The Time and Date can be set using the UniApps utility.
1. Press and hold the “ B ” icon in the upper right corner for 3 seconds.
Figure 38 - Event History screen
Figure 39 - Press and hold the "B" icon