1100-2184 Rev 0
23
3.9 Upload Floorplan Spreadsheet
1. Power up the AT-G-ALERT-C. When the System Startup (Home) screen appears,
access
System Settings
(gear icon).
2. After the System Setting screen appears, insert the USB stick containing the floorplan
spreadsheet into the USB slot of the controller.
Note: Instructions on filling out this spreadsheet are described earlier in this manual in
Sections 3.1 and 3.2
.
3. Press
Network Config
, and then press
“Upload CSV”
to upload the floorplan
spreadsheet
data.csv
from the root folder of the USB stick.
A success message will indicate that the upload is complete.
3.10 Commissioning
Each AT-G-ALERT ships with default Modbus ID set to 1. These can be set in either of
two methods:
Figure 21 - System Status screen
Figure 22 - System Settings screen
Содержание AquiTron AT-G-ALERT-C
Страница 1: ...1100 2184 Rev 0 1...
