Aquila AT01, Руководство по обслуживанию

Страница: 33 / 50

MAINTENANCE MANUAL
AQUILA AT01
A
1. Install wheel fairings. X
Install seats (if removed).
Install cabin floor boards.
Install baggage compartment floorboard.
Install access panel of the baggage compartment bulkhead.
Install access panel 210AB.
06-30-00
2. Flight controls - Check for full range of travel and excessive X
friction.
3. Flaps - Operate through full extension and retraction for X
steady and complete deployment. Check correct limit
switches operation at CRUISE, T/O and LDG flap positions.
Verify the corresponding flap switch position and the
corresponding flap position indicator reading.
4. Elevator trim - Check for full range of travel and excessive X
friction. Inspect proper operation of the trim control switch,
limit switches, and the trim position indicator. Verify that
elevator control forces decrease or increase when
operating elevator trim.
5. Engine and propeller controls - Check full range of motion X
without any obstruction or excessive friction to travel.
Check throttle and propeller control levers friction lock.
6. Foreign items - Remove any foreign items from the aircraft. X
No. Reference Interval Initials
100h other
Return to Service
Page 15
05-20-00
Maintenance Checks
16.09.19
No. (Cont.) Reference Interval Initials
100h other
Electrical System / Avionics
2)
6. Pitot heating system - Carefully check pitot tube for heating up X
with pitot heating switched ON.
WARNING:
RISK OF SKIN BURNS! DO NOT TOUCH
PITOT TUBE WHEN HEATING IS SWITCHED ON!
1) 2)
7. Garmin G500 system - Check all components and wiring for 34-25-00 X
damage, corrosion, proper operation and security of
attachment.
2)
8. Garmin G500 system - Check bonding. 34-25-00 2000h
2)
10 years
2)
9. Aspen EFD1000 system - Check all components and wiring for 34-25-00 annual
damage, corrosion, proper operation and security of
attachment. Perform bonding check.
1) Check has to be carried out every 100 hours of operation or 12 month, whichever comes first.
2) If installed.