Aquila AT01, Руководство по обслуживанию

Страница: 21 / 50

MAINTENANCE MANUAL
AQUILA AT01
A
1)
6. Engine and engine compartment - Clean R912* 12-20-00 1) X
for leakage check.
1)
7. Perform an engine test run as follows: R912* 12-20-00 8) X
Start engine and warm-up at 820 RPM for approx. 2 minutes,
continue at 1030 RPM, duration depends on ambient
temperature until oil temperature reaches 50° C.
Rudder pedal brakes and parking brake - Check for proper 32-40-00
operation.
Propeller governor - Set 1700 RPM and monitor the MT*
manifold pressure. Reduce engine speed by moving the
propeller control by 200 RPM. Note the RPM drop and
manifold pressure. Increase RPM to 1700 RPM. Repeat
three times.
RPM drop: _______RPM / Man. press :_______in. Hg
Engine instruments - Check engine parameters.
Magneto RPM drop - Set 1700 RPM. Check that RPM drop
is less than 120 RPM while operating on one magneto and
no more than a 50 RPM drop difference between left
and right magnetos.
RPM drop left magneto :_______RPM
RPM drop right magneto:_______RPM
Carburetor heat - Pull carburetor heat knob at 1700 RPM.
Engine RPM should show a drop of at least 20 RPM.
RPM drop:_______RPM
Engine full power - Advance throttle to full forward.
Tachometer should read 2265 ±50 RPM.
Full power RPM:_______RPM
Engine idle - Move throttle control lever to full aft.
Tachometer should read 750 +50 RPM.
Idle RPM:_______RPM
Cool down engine at 1100 RPM. Shut down engine,
set the ignition switch and the master switch to the OFF
position. Remove ignition key from aircraft.
1)
8. Airframe, power plant, propeller - Do a walk around X
to detect damages, fluid leaks or other abnormalities.
9. Fuselage and empennage - Clean. X
10. Aircraft interior - Clean and vacuum. X
11. Record all malfunctions and abnormalities. X
05-20-00
Page 3
Maintenance Checks
No. Pre-Inspection / Engine Ground Test (Cont.) Reference Interval Initials
100h other
16.09.19
1) Check has to be carried out every 100 hours of operation or 12 month, whichever comes first.