Aquila AT01, Руководство по обслуживанию

Страница: 27 / 50

MAINTENANCE MANUAL
AQUILA AT01
A
Page 9
05-20-00
Maintenance Checks
5. Canopy locking - Check the canopy locking mechanism 52-10-00 X
operates correctly. Check wear of parts. Check existence of
the locking pin. The pin has to protrude the cover by approx.
2 mm. Cases of lacking locking pins have to be reported to the
type certificate holder (contact information: see cover sheet).
Check function of the locking pin. The canopy locking
mechanism must not be too smooth-running. In the locked
position of the latch, a smooth running release of the latch
due to in-flight vibrations must not be possible.
If necessary, readjust locking pin.
6. Lubricate canopy lock assembly. 12-22-00 annual
7. Baggage door - Check door seal, door latching mechanism, X
and door hinge for defects and condition. Lubricate if needed. 12-22-00
Inspect door structure for cracks or other damage.
8. ELT - Perform ELT inspection. Check ELT mount and Velcro 25-62-00 annual
strap for security of attachment. Replace strap if necessary.
9. Seat belts/harnesses for pilot / co-pilot - Check components for X
completeness of the label, deformation, cracks, fractures,
functioning of moveable parts, corrosion, surface finish
condition and security of attachment.
Check textile components for damaged stitching, injurious
marks, broken fabric threads, chafe marks and fusing.
Perform functional check of buckle and inertia reel.
10. Seats - Check security of attachment of the seat assy to X
aircraft structure. Check operation of seat adjustment
mechanism and seat stops. Inspect gas spring struts for oil
leakage or other damage.
11. Seats - Check ease of movement - if required remove seats, 25-10-00 annual
clean and lubricate seat rails.
12. Center Console - Visually examine the parts of the engine annual
controls, lines and cables, located in the center console.
13. Engine and propeller controls - Check for proper function, X
security of attachment and for evidence of wear.
Check Bowden cables for bulging with control levers in the
full throttle / high RPM position. Check Bowden cable clamp
screws on control levers are freely rotatable.
14. Parking brake valve - Check for evidence of leakage especially X
at the brake line connections. Check control assy for damage.
15. Rudder pedal bearing - Lubricate. 12-22-00 annual
16. Brake master cylinders and brake lines in the cabin X
area - Check for security, condition and signs of leakage.
17. Fuel lines - Check for leakage and security. X
No. Fuselage / Cabin (Cont.) Reference Interval Initials
100h other
16.09.19