Aquila AT01, Руководство по обслуживанию

Страница: 26 / 50

MAINTENANCE MANUAL
AQUILA AT01
A
1. Spinner - Remove from aircraft and check for delamination 61-10-00 X
and cracks.
2. Spinner plate - Check for cracks and fit. X
3. Blade root and hub area - Examine for oil and grease leaks. X
4. Propeller blades - Check blade play (up to 3 mm [1/8 in.] X
allowed).
5. Propeller blades - Check blade angle play. (max. 2°) X
6. Hub - Inspect outside condition of the hub and parts for X
cracks, corrosion and deterioration.
7. Check nuts for low pitch - Inspect for tightness and X
safety wire.
8. Propeller assy - Check safetying. X
9. Propeller flange stop nuts - Check correct torque X
value (45 - 47 Nm [398 - 416 in.lbs]).
10. Propeller blades - Visual inspection for damage, repair if MT* 6.2) - 6.10) X
necessary. Attach spinner.
11. Propeller governor - Visually inspect for signs of oil leakage. 61-20-00 X
Check bolts and nuts are tightened properly and safety wired.
Check governor actuation for free movement and bulging.
Page 8
05-20-00
Maintenance Checks
1. Prepare aircraft for visual checks: X
Remove cabin carpets and floorboards;
Remove glare shield;
Remove baggage compartment floorboard;
Remove access panel of the baggage compartment
bulkhead;
Remove access panel 210AB.
06-30-00
2. Fuselage shell - Visual inspection for paint coat damage, X
dents, cracks, holes, distortion and other evidence of failure.
All unpainted parts for delamination (white spots).
3. Lower fin - Inspect fin and lower rudder for signs of X
breakage. Check skid plate for wear.
4. Canopy - Examine the acrylic glass for cracking, crazing X
and general condition.
Inspect tubular canopy hinge frame and brackets for cracks,
distortion, corrosion, wear, and security of attachment.
Check the gas spring strut for sufficient power and
evidence of leakage.
No. Fuselage / Cabin Reference Interval Initials
100h other
No. Propeller Reference Interval Initials
100h other
16.09.19