Aquila AT01, Руководство по обслуживанию

Страница: 23 / 50

MAINTENANCE MANUAL
AQUILA AT01
A
Page 5
05-20-00
Maintenance Checks
No. Engine (Cont.) Reference Interval Initials
100h other
3)
10. Cooling system - Renew coolant (conventional coolant only). 12-14-00 2 years
Flush the cooling system. R912* 12-20-00 9)
1)
11. Coolant hoses and lines - Check for damage, leakage, 75-00-00 X
hardening due to heat, porosity, loose connections and R912* 12-20-00 9)
secure attachments. Check routing for kinks and narrow
bends.
1)
12. Coolant expansion tank - Check for damage and 75-00-00 X
abnormalities. Inspect rubber protection plate on tank base R912* 12-10-00 3)
for secure fit. Check coolant level, replenish as necessary. R912* 12-20-00 9)
Check gasket of tank cap, inspect pressure control valve SB-912-043
and return valve. The pressure control valve opens
at 1,2 bar (18 psi). Check coolant with densimeter or glycol
tester.
1)
13. Overflow bottle - Inspect for damage and abnormalities. 75-00-00 X
Verify coolant level, replenish as necessary. Inspect venting R912* 12-10-00 3)
bore in cap of overflow bottle for clear passage. Check R912* 12-20-00 9)
line from exp. tank to overflow bottle for damage,
leakage and clear passage.
1)
14. Oil and coolant radiator - Check for obstructions, leaks 75-00-00 X
and security of attachment. If necessary, clean cooling fins 79-20-00
and do a pressure leakage test.
1)
15. Oil lines - Inspect for damage, leakage, hardening due to heat, R912* 12-20-00 4) X
porosity, security of connections and attachments.
Check routing for kinks or narrow bends. Check fire
protection shielding.
1)
16. Oil tank vent line - Check for proper routing, for obstructions X
and clear passage
1)
17. Fuel lines - Check for damage, leakage, hardening due to heat, R912* 12-20-00 4) X
porosity, secure connections and attachments.
Check routing for kinks or narrow bends. Check metal fuel
lines for cracks and scuffing marks.
1)
18. Fuel selector / shut-off valve - Check for security of X
attachment. Check that the valve engages noticeable
into the positions LEFT, RIGHT and OFF.
1)
19. Filter element of electrical fuel pump - Inspect and clean. 28-20-00 X
2) 1)
20. Battery - Clean. Check charge. Measure residual capacity . 12-17-00 X
2)
Residual capacity must be at least 19Ah . If applicable, check 24-30-00
acid level and vent case. If necessary, charge/replace battery.
1)
21. Battery tray, terminals and cables - Check for security, 12-22-00 X
corrosion and general condition. Grease battery terminals.
1)
22. Starter - Check security of attachment and electrical X
connections.
16.09.19
1) Check has to be carried out every 100 hours of operation or 12 month, whichever comes first.
2) N/VFR equipped aircraft only.
3) If SB-AT01-025 or SB-AT01-029 (retrofit of a new cooling system) has been carried out.