Aquila AT01, Руководство по обслуживанию

Страница: 32 / 50

MAINTENANCE MANUAL
AQUILA AT01
A
1)
1. Electrical wiring system - Check the complete electrical R912* 12-20-00 13) X
wiring system for security, damage, wear and secure fit.
Check all cable connections for tight fit, good contact,
corrosion and condition.
2. Tank inlet bonding wires - Check bonding between electric annual
ground (exhaust port) and tank inlet (max. 1 Ù ).
3. Tank inlet bonding wires - Check bonding wires at the SB-AT01-027 annual
airframe ground tube for yellow discoloration.
4. Instruments - Check instrument panel mounting brackets for annual
security and condition. Examine instruments for security of
attachment. Check electrical cables, hoses and lines for correct
installation, condition and proper routing. Inspect air filter
of the pitot / static system for obstructions and contamination.
5. Pitot / static system - Check pitot tube for security of 34-11-00 X
attachment, condition and obstructions. Check pitot and
static pressure lines for correct installation, condition,
2)
water and proper routing. Check water traps for water.
Page 14
05-20-00
Maintenance Checks
No. Reference Interval Initials
100h other
Electrical System / Avionics
16.09.19
No. Reference Interval Initials
100h other
Nose and Main Landing Gear (Cont.)
1) Check has to be carried out every 100 hours of operation or 12 month, whichever comes first.
2) If installed.
5. Nose wheel steering - Inspect nose wheel steering tubes for X
condition, excessive play and correct safetying. Check return
springs at nose gear strut for security and verify they are
tension-free, when the nose wheel is in neutral position.
6. Main landing gear - Check main gear struts for deformation, X
cracks, damage to the paint coat, and corrosion. Inspect
wheel axles for security of attachment to struts and for any
damage.
7. Wheels and rims - Clean. Check tires for wear, cuts, X
foreign matter and deterioration. Inspect rims for security,
deformation, cracks and other damage. Examine wheel
bearings for excessive play, corrosion and irregular operation.
Check tire pressure and proper location of the red slide marks.
8. Wheel bearings - Clean and lubricate. 12-22-00 500h
annual
9. Wheel brakes - Clean. Apply brakes, examine system for leaks. 32-40-00 X
Inspect brake fluid carrying lines at the main landing gear for
condition, leakage and security of attachment. Inspect brake
discs for cracks, corrosion and wear. Replace brake discs if
worn below 4.3mm (0.17 in.). Inspect brake pads for condition
and wear. Replace linings when worn to 2.6mm (0.10 in.).
Check freedom of movement of the pistons and pressure plates.
10. Wheel axles - Clean. Visually inspect for cracks, nicks, every wheel
corrosion or other damage. removal