AQUAPHOR
PROFESSIONAL
WATER TREATMENT
L.Tolstoi
2A, Sillamäe,
40231 Estonia
www.pro.aquaphor.com
International: +372 356 2204 21
Skype: aquaphor market.pro
e-mail: [email protected]
FLUSH VALVE (flushing valve) - indication of the flush solenoid valve, displays as
ON state.
FULL - indication of the filling process of the permeate tank, shows the upper limit
level of permeate in the tank.
LOW FEED PRESS (LOW PRESSURE OF WATER SUPPLY) - The alarm indicator
of low water level. The indicator lights in the absence or lack of water in the raw
water tank.
LOW PRESS (low pressure) - Indication of the pressure sensor at the entrance to the
high pressure pump. The indicator lights when the pressure of the water supply is too
low on the entrance of the high pressure pump.
HIGH PRESS (high pressure) - Indication of abnormal high pressure at the pump
outlet. The indicator lights when the pressure is too high at the outlet of the high
pressure pump (for mod
els with index “S” transducer are
not included).
CD max (max. conductivity) - the alarm of exceeding the limit of conductivity.
SLP (sleep\waiting) - the system is in standby mode.
FULL (shown in the sign display) f
ull tank of water, lit the lamp «FULL».
ALARM (error) (shown in the sign display) - the presence of the error lights the lamp
"ALARM".
Display panel controller
SET
- button parameter setting, selection of the parameters to change the display
-
circular selection discharge
–
thousands, hundreds, tens and units, selected
number is flashing
-
setting the value of the selected item (cyclically from 0 to 9)
C/T
-
button C/T, confirmation the saving of changed parameter or switching over
between the value of the conductivity and temperature in measurement mode
