AQUAPHOR
PROFESSIONAL
WATER TREATMENT
L.Tolstoi
2A, Sillamäe,
40231 Estonia
www.pro.aquaphor.com
International: +372 356 2204 21
Skype: aquaphor market.pro
e-mail: [email protected]
7.8 Mode of operation
The unit has two modes
–
automatic and manual (CIP). Fully automatic operation is
operated by the RO controller, the water level sensor, the pressure sensor and the
TDS meter. In most cases the system is able to provide a continuous supply of water
automatically.
8.
CONTROL SYSTEM
a.
Control system and indication
RO system equipped with a switch system operating modes
“AUTO” –
automatic
mode, “OFF” –
switch off
and “CIP”
–
manual mode. Fully automatic operation is
operated by the controller. In most cases the system is able to provide a continuous
supply of water automatically. If necessary, it is possible to switch to manual mode,
eg; for flushing the membrane. It is necessary to switch from
“AUTO” to “MANUAL”
or
“CIP”.
The switch
“EMERGENCY
STOP”
de-energizes the entire electrical
circuit and is activated by turning in the direction of the arrows which is drawn on it
(typically clockwise). To re-power the RO system is necessary to press the switch
“EMERGENCY STOP”. To reset the conductivity controller in the case of
emergency stop, you need to press the "RESET" button.
b.
Conductivity controller
Your system is equipped with a conductivity controller with the function of TDS
meter with temperature compensation mode, in the presence of the corresponding
conductivity sensor, on the screen the controller will display the conductivity of the
raw water in the “on
-
line”. The controller monitors the status of various sensors and
controls the operation of the RO system, based on the adjusting algorithm, the
standard for the majority of osmosis.
Visual screen display of the work process intuitively and immediately gives an idea
of the condition and operation of various modules of the RO system.
