Aqua Leader Contempra Round, Общее руководство по инструкции

Страница: 16 / 24

05
SECTION
GENERAL INSTRUCTIONS - ROUND POOLS
INSTALLING
THE LINER
15
TYPE 2 - bead/snap bead liner
With a snap bead liner you will not use the plastic coping strips that are packed
in the parts carton of many pools. You can discard those pieces (if they are
included). Instead, you should have received a beaded liner track (referred to as a
“coping bead receiver”). (image 22)
The beaded liner track should be installed onto the pool wall all of the way
around the pool. These pieces should be as close together as possible. Leaving
spaces between bead tracks can cause liner problems later on.
Once all of the beaded liner track is on the wall, you can snap the liner bead into
the beaded liner track at four random points around the pool. After that is done,
and you are satisfied with how the liner is situated within the pool, you can con-
tinue snapping the remainder of the liner into place around the pool.
Go around the entire pool again making certain that the liner is securely snapped
into the track. This is important to confirm so that the liner does not pull out
while under pressure of being filled with water.
Go around the liner pool again making certain that the liner is securely snapped
into the track. This is important to confirm so that the liner does not pull out
while under the pressure of being filled with water.
22