Aqua Leader Contempra Round, Общее руководство по инструкции

Страница: 7 / 24

02
SECTION
GENERAL INSTRUCTIONS - ROUND POOLS
1
. Mark out the area
Drive a peg into the ground at the center of the area where you want your pool.
Use a length of sting tied between the peg and a can of spray can, and mark a cir-
cle on the ground (a tape measure can also be used). The circle will be 12” (30 cm)
bigger all round than the pool. (image 1) See radius lenght below.
2.
Remove the sod
Remove all sod and plants from the circle. (image 2)
Remove any sticks, stones and roots from the circle using rake.
To make sure your pool is stable, compact the ground well, use compactor, be-
fore adding the sand.
IMPORTANT NOTE:
Your pool must be perfectly level. Take the
time you need to be sure your foundation is
perfectly level.
GROUND
PREPARATION
6
1
2
Pool diameter Radius
15’ (4,5m)
18’ (5,5m)
21’ (6,4m)
24’ (7,3m)
27’ (8,2m)
30’ (9,1m)
33’ (10m)
8’ (2,4m)
9’6’’ (2,9m)
11’ (3,3m)
12’6’’ (3,8m)
14’ (4,3m)
15’6’’ (4,8m)
17’ (5,2m)
R
Plan your installation first
Be careful
Be careful
Above ground pools are not designed to be installed below ground level. Outside
ground forces can collapse pool wall. If you have an irregular terrain, contact
your dealer for approppriate advice. Pools install on irregular terrain ARE
NOT COVERED BY THE MANUFACTURER WARRANTY.