Aqua Leader Contempra Round, Общее руководство по инструкции

Страница: 20 / 24

06
SECTION
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING
THE POOL FRAME
19
Use the optical level to ensure that the ground
is perfectly flat and level .
IMPORTANT NOTE:
IMPORTANT NOTE
We suggest that you install all the top ledges
on the wall before attaching them.
Insert the outer upright in the bottom joining plate
Snap the outer upright onto the middle bracket of the upright.
Secure the outer upright with the white headed screw at the top of it.
(image 30)
13.
Install the outer upright
Skimmer top ledge
Position and place the skimmer top ledge on the upright above the top plates.
Make sure the skimmer top ledge is align with the skimmer and water return
holes. The skimmer top ledge must be pushed toward the inside part of the pool.
(image 29)
Partially insert 2 Phillips screw and evenly distribute the space between the two
extrimities. Then, tight up the screws.
29
30
2x
1x
TOP
Use the optical level to ensure that the ground
is perfectly flat and level .
IMPORTANT NOTE:
IMPORTANT NOTE
Use the white headed screw in this step.