AQUASTREAM ULTIMATE
15.1.
15.1.
15.1.
15.1. Display settings
Display settings
Display settings
Display settings
Units for temperature and flow measurement can be selected, display brightness
and page interval can be adjusted.
15.2.
15.2.
15.2.
15.2. Charts
Charts
Charts
Charts
Four configurable chart pages are available to be displayed in the pump display.
Data source and refresh rate can be selected for each chart.
15.3.
15.3.
15.3.
15.3. Display pages
Display pages
Display pages
Display pages
During normal operation, a variety of predefined display pages are available.
Each of these pages can be activated or deactivated individually.
16.
16.
16.
16. System settings aquastream ULTIMATE
System settings aquastream ULTIMATE
System settings aquastream ULTIMATE
System settings aquastream ULTIMATE
aquasuite: Select “System” from the device list below the “aquastream ULTIMATE”
entry.
Device menu: Select “System” from the menu list and confirm by pressing the mid-
dle key.
16.1.
16.1.
16.1.
16.1. Device information
Device information
Device information
Device information
The details displayed here might be required when you contact our service for sup-
port. You may enter a “Device description” for easier identification, this text will be
displayed in the device list and in the data quick view.
16.2.
16.2.
16.2.
16.2. Factory defaults
Factory defaults
Factory defaults
Factory defaults
Click the button “Reset device to factory defaults” in the aquasuite or select the
“Factory defaults” entry from the menu for a complete reset of all settings. You will
have to completely reconfigure the device after resetting it to factory defaults!
16.3.
16.3.
16.3.
16.3. aquabus configuration
aquabus configuration
aquabus configuration
aquabus configuration
Before connecting two aquastream pumps simultaneously to an aquaero 5/6 via
aquabus, each pump has to be configured to a unique aquabus address. If only
one device is connected via aquabus, this step may be skipped. Address 17 and
18 are available. Please note that aquastream ULTIMATE and aquastream XT as
well as D5 NEXT share resource assignments in the aquabus device handling of
the aquaero. A combined maximum of two pumps of these types can be managed
by the aquaero.
Changes to the bus address or aquabus sensor configuration are effective within a
few seconds. However, it may take up to five minutes for a connected aquaero to
update its configuration.
© 2016-2018
Aqua Computer GmbH & Co. KG
- 23 -
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
