Apxalarm APX32EN, Руководство по программированию

Страница: 9 / 24

- 9 -
Field Function Programmed Values[ ] = Table 1 Default Value
✱
88 PAGER CHARACTERS
Up to 16 digits can be entered that will appear in front of the 7-digit
pager message sent by the control (either upon system event or upon
pressing AUX key [if programmed for paging]; see field
✻
87 and
✻
49
for other options regarding the paging feature). See the Installation
Instructions (fields
✻
87,
✻
88 and
✻
49) for full descriptions of the
paging feature. You do not need to fill all 16 digits (press [
✻
] to
advance to next field). To clear entries, enter
✻
88
✻
.
To enter “
✻
” = [#] + [11]; To enter “#” = [#] + 12]
To enter 2-second pause = [#] + [13] (some pagers require an
additional delay [pause] in order to receive the entire message)
✱ 89
EVENT LOG 80% FULL RPT CODE
| [0,0]
✱ 90
EVENT LOGGING
[3]
0 = None; 1 = Alarm/Alarm Restore; 2 = Trouble/Trouble Restore; 4
= Bypass/Bypass Restore; 8 = Open/Close.
Example: To select “Alarm/Alarm Restore”, and “Open/Close”, enter 9
(1 + 8); To select all, enter #15.
Note: System messages are logged when any non-zero selection is
made.
✱ 91
ALARM AUDIO VERIFICATION
(AAV)/REMOTE PHONE CONTROL
[2]
0 = None
1 = AAV and remote phone control
2 = remote phone control only
4 = AAV only
Notes: (1) In order to activate the Remote Phone Control feature and defeat
an answering machine, ensure that the correct ring detection
count (“15”) has been programmed in field
✻
95.
(2) Remote phone session will be terminated if a report must be
sent.
(3) Alarm Audio Verification will only function when Contact ID® is
selected. AAV cannot be used for UL installations.
(4) If an alarm will be reported to primary and secondary phone
numbers, AAV can only function via the secondary number.
(5) If an alarm will be reported to a pager (6-8 in field
✻
49), or to
follow me phone number (10-12 in field
✻
49) AAV cannot be
used.
(6) If AAV is selected and LRR/IP communications device is
enabled, you must enter "0" (primary dialer preferred channel) as
the second entry in Field *77.
✱
92 NUMBER OF REPORTS IN ARMED
PERIOD
[0]
0 = 10 Alarm/Alarm Restore Reports;
1 = Unlimited (UL installations = 0)
DOWNLOAD INFORMATION (
✱
93,
✱
94,
✱
95)
✱
93 FLEXIBLE CALLBACK
[0]
0 = No flexible callback; 1 = Last digit flexible; 2 = Last 2 digits
flexible;
3 = Last 3 digits flexible