Apxalarm APX32EN, Руководство по программированию

Страница: 8 / 24

- 8 -
Field Function Programmed Values[ ] = Table 1 Default Value
DYNAMIC SIGNALING FIELD
✻ ✻ ✻ ✻
77
✱
77 DYNAMIC SIGNALING DELAY/
DYNAMIC SIGNALING PRIORITY
| [0, 0]
1st Entry (delay before switch CS reporting path)
0 = Redundant reporting
on dialer and LRR/IP
device
7 = 105 seconds
8 = 120 seconds
9 = 135 seconds
1 = 15 seconds #10 = 150 seconds
2 = 30 seconds #11 = 165 seconds
3 = 45 seconds #12 = 180 seconds
4 = 60 seconds #13 = 195 seconds
5 = 75 seconds #14 = 210 seconds
6 = 90 seconds #15 = 225 seconds
2nd Entry
0 = Primary Dialer Preferred Channel
1 = LRR/IP Preferred Channel
2 = LRR/IP reporting only
✱
78 PROGRAMMABLE TONE
GENERATION TIME
| [0, 0]
00 = Disabled
01-09 = 100-900 ms
10-99 = 1.0 – 9.9 secs.
OUTPUT AND SYSTEM SETUP (
✱
80–
✱
92)
✱
80
✱
81
DEVICE PROGRAMMING MENU
MODE
ZONE LISTS MENU MODE Program
✻
80 and
✻
81 only if Powerline Carrier Devices or chime by
zone are to be used. See procedure later in this manual.
✱
83 ENHANCED SEQUENTIAL MODE See procedure later in this manual.
✱
84 ASSIGN ZONE VOICE DESCRIPTOR See procedure later in this manual.
✱
85 RECORD CUSTOM VOICE
DESCRIPTOR See procedure later in this manual.
✱
86 MULTI-MODE (E-MAIL
NOTIFICATION)
[0]
0 = Disable multi-mode devices
1 = Enable multi-mode device address #6 only
2 = Enable multi-mode device address #7 only
3 = Enable multi-mode addresses
✱ 87
AUX FUNCTION/ 1-BUTTON PAGING
[0]
0 = Aux key performs defined function (macro);
1 = Aux key sends message to pager or voice message to
follow me system phone number.
If 1, you must also select an option 6-9 in field
✻ 49 for the
pager or 10-13 for the follow me system announcement.