- 10 -
Field Function
Programmed Values
[ ] = Table 1 Default Value
✱
94
DOWNLOAD PHONE NUMBER
Enter up to 20 digits, 0–9; #+11 for '
✻
'; #+12 for '#'; #+13 for a
pause. Do not fill unused spaces. If fewer than 20 digits entered,
pressing
✻
advances to the next field. To clear entries from field,
press
✻
94
✻
.
Note:
In UL installations, downloading may only be performed if a technician
is at the site.
✱
95
RING DETECT COUNT FOR
DOWNLOADING/REMOTE PHONE
CONTROL MODE
[15]
0 = Disable Station Initiated Download; 1–14 = number of rings (1–9,
[#]+10 =10, [#] +11 =11, [#] +12 =12, [#] +13 =13, [#] +14
=14); 15 = answering machine defeat ([#] +15 =15)
✱
96
INITIALIZE DOWNLOAD ID &
SUBSCRIBER ACCOUNT
No entry required
✱
97
SET ALL PROGRAM FIELDS TO
DEFAULT VALUES
Enter 1 to select default table
Enter 0 to abort.
✱
98
EXITS PROGRAMMING MODE
(PREVENTS RE-ENTRY)
If
✻
98 is used to exit programming mode, you cannot enter the
Installer Code + 8+ 0 + 0 for re-entry. You must press "
✻
" and "#"
within 50 seconds of power up or from exiting Programming mode to
re-enter Programming mode.
Note: After exiting Program mode, the system takes up to 1 minute to reset. To
bypass the reset delay, press [#] + [0].
✱
99
EXITS PROGRAMMING MODE
(ALLOWS
RE-ENTRY)
Installer Code + 8 + 0 + 0
or:
Power-up, then press "
✻
" and "#" within 50 seconds of power up or
from exiting Programming mode.
Note:
After exiting Program mode, the system takes up to 1 minute to reset.
To bypass the reset delay, press [#] + [0].
