APRILIA ETV mille, Руководство по ремонту

Страница: 291 / 352

ETV mille
CHASSIS
7 - 80 -
00
Release 00/2004 - 04
7.7.4 COMPONENT INSPECTION
STANCHION TUBE
!
Inspect the sliding surface for scoring and/or scratching.
Eliminate minor scoring with wet sand paper (grain size 1).
Replace the stanchion (1) if badly scored.
!
Check for stanchion buckling (1) using a dial gauge.
Replace the stanchion if buckled beyond the service
limit.
Service limit: 0.2 mm.
WARNING
Never attempt to straighten a buckled stanchion as
this would weaken the overall structure leading to a
dangerous riding condition.
SLIDER
!
Inspect for damage and/or cracking. Replace if
damaged.
SPRING
!
Check spring condition (2) and length.
!
Replace the spring (2) if stretched beyond the service
limit.
Minimum length of the uncompressed spring: 400 mm.
!
Check the condition of the following components:
- guide ring (3);
- guide bush (4);
- damping cylinder (5);
- oil seal (6).
Replace any component which shows excessive wear or
damage.
WARNING
Clean off any debris collected by the bushes taking
care not to scratch the bush surface.
!
Renew the following components on assembly:
- oil seal (7);
- dust seal (8);
- both O-ring fitted to the top cap (9).
1
Min 400 mm
2
3
4
7
8
6
5
9