APRILIA ETV mille, Руководство по ремонту, Страница: 198 / 352

ETV mille
ELECTRICAL SYSTEM
6 - 45 -
00
Release 00/2004 - 04
WARNING
Do not cut or prick the sealed ends of the container
(2).
!
Turn over the container (2) and place the sealed ends
over the openings of the battery cells.
!
Press down on the container (2) to break the seals and
let the fluid flow into the battery cells.
NOTE
Ensure that the container (2) is perfectly vertical
to facilitate drainage.
!
Leave the container (2) in place for about twenty
minutes and ensure that the fluid is flowing into to the
battery.
WARNING
Do not remove the container (2) unless all fluid has
drained out.
!
If there is still some fluid left in the container (2) after
twenty minutes, tap the uppermost end of the container
with your fingers to obtain complete drainage.
!
Lift the container (2) carefully to release it from the
battery.
!
Place the caps (3) over the battery cell openings.
!
Press down firmly until the underside (3) of the cap
strip contacts battery top face.
WARNING
Never remove the caps (3).
!
Connect the battery to a battery charger.
!
Charge the battery at normal charge rate (see chart).
!
Refit the battery just before delivering the motorcycle to
end user.
Charge rate Ampere rating
Charge time
(hours)
Normal 1.2 8 -10
Fast 12 0.5
2
3