Apreto Networks PacketMAX 5000 Скачать руководство пользователя страница 144

Страница: 144 / 150

E–2

PacketMax 5000 Installation and Operation Manual, 10007678 Rev J

Chapter E. Certifications

E.2 X509 Crypto License

/* crypto/x509/x509_vfy.c */

[email protected]

)

* This package is an SSL implementation written

* by Eric Young (

[email protected]

* The implementation was written so as to conform with Netscapes SSL.

* This library is free for commercial and non-commercial use as long as

* the following conditions are aheared to. The following conditions

* apply to all code found in this distribution, be it the RC4, RSA,

* lhash, DES, etc., code; not just the SSL code. The SSL documentation

* included with this distribution is covered by the same copyright terms

* except that the holder is Tim Hudson (

[email protected]

* Copyright remains Eric Young's, and as such any Copyright notices in

* the code are not to be removed.

* If this package is used in a product, Eric Young should be given attribution

* as the author of the parts of the library used.

* This can be in the form of a textual message at program startup or

* in documentation (online or textual) provided with the package.

* Redistribution and use in source and binary forms, with or without

* modification, are permitted provided that the following conditions

* are met:

* 1. Redistributions of source code must retain the copyright

* notice, this list of conditions and the following disclaimer.

* 2. Redistributions in binary form must reproduce the above copyright

* notice, this list of conditions and the following disclaimer in the

* documentation and/or other materials provided with the distribution.

* 3. All advertising materials mentioning features or use of this software

* must display the following acknowledgement:

* "This product includes cryptographic software written by

* Eric Young (

[email protected]

* The word 'cryptographic' can be left out if the rouines from the library

* being used are not cryptographic related :-).

* 4. If you include any Windows specific code (or a derivative thereof) from

* the apps directory (application code) you must include an acknowledgement:

* "This product includes software written by Tim Hudson (

[email protected]

* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND

* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE

* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE

* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
BE LIABLE

Содержание PacketMAX 5000























































































































































Результаты поиска

Содержание PacketMAX 5000

Отзывы:

Похожие инструкции для PacketMAX 5000

Бренды по названию

Популярные бренды

Apreto Networks PacketMAX 5000, Инструкция по установке и эксплуатации

Результаты поиска

Содержание PacketMAX 5000

Отзывы:

Похожие инструкции для PacketMAX 5000

Бренды по названию

Популярные бренды