Aplex ARCDIS -107 Скачать руководство пользователя страница 2

Страница: 2 / 50

ARCDIS-1XX User Manual

Warning!________________________________

Disclaimer

This information in this document is subject to change without notice. In no event shall Aplex

Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising

from either the use or misuse of information in this document or in any related materials.

This equipment generates, uses and can radiate radio frequency energy and if not installed

and used in accordance with the instructions manual, it may cause interference to radio

communications. It has been tested and found to comply with the limits for a Class A computing

device pursuant to FCC Rules, which are designed to provide reasonable protection against such

interference when operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference in which case the user at his own expense will be

required to take whatever measures may be required to correct the interference.

Electric Shock Hazard

– Do not operate the machine with its back cover removed. There are

dangerous high voltages inside.

Содержание ARCDIS -107



















































Результаты поиска

Содержание ARCDIS -107

Отзывы:

Похожие инструкции для ARCDIS -107

Бренды по названию

Популярные бренды

Aplex ARCDIS -107, Руководство пользователя

Результаты поиска

Содержание ARCDIS -107

Отзывы:

Похожие инструкции для ARCDIS -107

Бренды по названию

Популярные бренды