ApenGroup Aermax Series, Инструкция по использованию, установке и обслуживанию

Страница: 32 / 60

32
code HC0100.00GB ed.A-1509
HY
AQUAPUMP HYBRID
HYBRID HEATER
5. INSTALLATION INSTRUCTIONS
Instructions for installing and setting the boiler are intended for
suitably qualified personnel only. Please read the safety warnings.
N.B.: the installer must instruct the user about the use of the
machine and inform him/her about the presence, in this manual,
of a chapter fully intended for the final user.
5.1. General Installation Instructions
The fan heater boiler installation must be carried out in compliance
with the current regulations concerning design, installation and
maintenance of thermal systems.
Reference standards (valid for Italy only):
•
Ministerial Decree no. 74 of 12 April 1996 containing the fire
prevention rules for design, construction and operation of
thermal systems fired with gaseous fuels;
• Presidential Decree no.412/93 which regulates design,
installation, operation and maintenance of thermal systems;
• Presidential Decree no.551/99: regulation amending Decree
412/93;
• Law no.10/91: rules for implementing the national energy plan
in the field of the rational use of energy, energy savings and
the development of renewable energy sources;
• Standard UNI-CIG 7129 regarding the installation of natural
gas equipment;
• Standard UNI-CIG 7131 regarding the installation of LPG
equipment;
• Law 186 of 01 March 1986 regarding the installation of
electrical systems;
• ISPESL regulation Ministerial Decree 01/12/1975;
• Presidential Decree 477/91;
• Ministerial Decree no. 37 of 22/01/2008;
• Law no. 192/05 of 19/08/2005,
• Legislative Decree no. 311 of 29/12/2006;
• Ministerial Decree no. 37 of 22/01/2008
and subsequent amendments and/or integrations.
5.2. Transport and Handling
Unload the equipment from the truck and move it to the site of
installation by using means of transport suitable for the shape
of the load and for its weight.
If the thermal unit is stored at the customer’s premises, make
sure a suitable place is selected, sheltered from rain and from
excessive humidity, for the shortest possible time.
Any lifting and transport operations must be carried out by
skilled staff, adequately trained and informed on the working
procedures and safety regulations.
Recovered packaging materials must be separated and disposed
of according to applicable regulations in the country of use.
While unpacking the unit, check that the unit and all its parts
have not been damaged during transport and match the order.
If damages have occurred or parts are found to be missing,
immediately contact the supplier.
During unit unloading and positioning, special attention should
be paid to prevent sudden or violent movements in order to
protect the inner components. The units can be lifted by using a
lift truck or, as an alternative, through belts, paying attention not
to damage the side and upper panels of the unit. During these
operations, the unit must always be kept in horizontal position.
N
ote The manufacturer is not liable for any damages
occurred during transport, handling, unloading, etc.
5.3. Accessories for installation
The supply of the equipment includes:
AQUAPUMP HYBRID HY:
• no. 1 fume exhaust terminal Ø60 made of plastic material
complete with fume extraction intake;
• no. 1 Smart EASY (Smart WEB as optional) remote control
Fan heaters ABXXXIT-00H0:
•
no. 2 flexible hoses for every single fan heater (G1" for AB034,
G3/4" for AB018), length 0.5 metres, with relevant gaskets;
• no.1 shelf for indoor unit support;
• no.1 condensate collection tray.
5.4. Installation of AQUAPUMP HYBRID - HY
AQUAPUMP HYBRID series models have been designed and
manufactured for outdoor installations; therefore it is necessary
to avoid the coverage with roof or the positioning near trees
or walls in order to prevent air recirculation. It is good practice
to create a support base having size suitable for the unit. The
units transmit a low level of vibrations to the ground: anyway, it
is necessary to place some anti-vibration supports between the
base frame and the bearing plane. It is very important to prevent
recirculation phenomena between intake and delivery, to avoid
the deterioration of unit performance or even the interruption
of the standard operation. For this purpose it is necessary to
ensure the minimum clearances indicated below.
MODEL A B* C D E**
HY434IT 1500 500 400 400 500
HY534IT 1500 500 400 400 500
* Clearance recommended for installation and maintenance
** Clearance recommended for service, maintenance, fume exhaust
installation.